Resinous Flooring Systems

Medium Duty (MD) floors (per FeRFA) include surfaces subjected to regular pedestrian traffic and frequent movement of cars, trucks and forklifts with rubber tyres, as well as occasional traffic of trolleys with hard plastic wheels. These areas require systems that offer very high and effective protection against mechanical loads, strong substrate adhesion, and durability under chemical exposure.

NEOTEX offers advanced and durable solventfree coating systems, as well as selflevelling systems, ideally suited to the requirements of MD floors, fully covering the longterm needs of industrial production & processing facilities, logistics areas, parking areas, etc..

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous passage of cars, trucks and forklifts with rubber tyres, as well as occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems that provide exceptionally high and effective protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical durability.

NEOTEX offers advanced and durable selflevelling systems and multilayer systems, ideally adapted to MD/HD requirements, fully covering the highdemand needs of industrial production & processing facilities, logistics areas, parking areas, etc., over the long term.

Selflevelling systems for MD/HD floors are an ideal solution for surfaces requiring extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under very heavy loading. They typically consist of at least two layers, including the primer, and create a cohesive film with a total thickness from 2 mm up to approx. 4 mm, depending on the application requirements.

Thanks to their flow, selflevelling systems ensure a uniform, level surface, while they can provide a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They deliver very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with superior technical requirements.

NEOTEX supplies advanced selflevelling epoxy systems and selflevelling polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are distinguished by thickness stability, resistance to heavy loads and excellent surface uniformity—constituting a reliable, comprehensive solution for Medium/Heavy Duty floors where absolute functionality and enhanced aesthetics are required.

MD – Medium Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent movement of cars and trucks, as well as forklift traffic with rubber tyres, plus occasional traffic of trolleys with hard plastic wheels. Such spaces demand systems that deliver very high and effective protection against mechanical loads, strong substrate adhesion, and resistance to chemical exposure.

NEOTEX provides advanced, durable solventfree coating systems and selflevelling systems with LEEDcompliant lowVOC performance, ideally tailored to MD floors and fully meeting the longterm needs of industrial production & processing, logistics, parking and related applications.

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous passage of cars, trucks and forklifts with rubber tyres, as well as occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems that provide exceptionally high and effective protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical durability.

NEOTEX offers advanced and durable selflevelling systems and multilayer systems, ideally adapted to MD/HD requirements, fully covering the highdemand needs of industrial production & processing facilities, logistics areas, parking areas, etc., over the long term.

Selflevelling systems for MD/HD floors are an ideal solution for surfaces requiring extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under very heavy loading. They typically consist of at least two layers, including the primer, and create a cohesive film with a total thickness from 2 mm up to approx. 4 mm, depending on the application requirements.

Thanks to their flow, selflevelling systems ensure a uniform, level surface, while they can provide a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They deliver very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with superior technical requirements.

NEOTEX supplies advanced selflevelling epoxy systems and selflevelling polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are distinguished by thickness stability, resistance to heavy loads and excellent surface uniformity—constituting a reliable, comprehensive solution for Medium/Heavy Duty floors where absolute functionality and enhanced aesthetics are required.

Light Duty (LD – Light Duty per FeRFA) floors include surfaces subjected mainly to light pedestrian traffic and occasional passage of vehicles with rubber tyres. These areas require a system that provides reliable protection against mild mechanical loads, along with ease of maintenance/cleaning, waterproofing, and a meaningful aesthetic upgrade of the space.

NEOTEX offers advanced, highly durable waterbased coating systems, ideal for meeting the requirements of exterior LD floors in residential, commercial, professional or communal areas.

Waterbased varnish systems for LD floors consist of clear protective coatings, applied in two or more coats, with a low total dry film thickness (up to approx. 150 mm). They can deliver a smooth or anti slip finish—by adding a suitable anti slip additive in the final coat—and ensure a clean, durable and elegant surface suitable for everyday use.

NEOTEX provides water-based polyurethane varnish systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Medium Duty (MD) floors (per FeRFA) include surfaces subjected to regular pedestrian traffic and frequent movement of cars, trucks and forklifts with rubber tyres, as well as occasional traffic of trolleys with hard plastic wheels. These areas require systems that offer very high and effective protection against mechanical loads, strong substrate adhesion, and durability under chemical exposure.

NEOTEX offers advanced and durable solventfree coating systems, as well as selflevelling systems, ideally suited to the requirements of MD floors, fully covering the longterm needs of industrial production & processing facilities, logistics areas, parking areas, etc..

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous passage of cars, trucks and forklifts with rubber tyres, as well as occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems that provide exceptionally high and effective protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical durability.

NEOTEX offers advanced and durable selflevelling systems and multilayer systems, ideally adapted to MD/HD requirements, fully covering the highdemand needs of industrial production & processing facilities, logistics areas, parking areas, etc., over the long term.

Selflevelling systems for MD/HD floors are an ideal solution for surfaces requiring extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under very heavy loading. They typically consist of at least two layers, including the primer, and create a cohesive film with a total thickness from 2 mm up to approx. 4 mm, depending on the application requirements.

Thanks to their flow, selflevelling systems ensure a uniform, level surface, while they can provide a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They deliver very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with superior technical requirements.

NEOTEX supplies advanced selflevelling epoxy systems and selflevelling polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are distinguished by thickness stability, resistance to heavy loads and excellent surface uniformity—constituting a reliable, comprehensive solution for Medium/Heavy Duty floors where absolute functionality and enhanced aesthetics are required.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

MD – Medium Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent movement of cars and trucks, as well as forklift traffic with rubber tyres, plus occasional traffic of trolleys with hard plastic wheels. Such spaces demand systems that deliver very high and effective protection against mechanical loads, strong substrate adhesion, and resistance to chemical exposure.

NEOTEX provides advanced, durable solventfree coating systems and selflevelling systems with LEEDcompliant lowVOC performance, ideally tailored to MD floors and fully meeting the longterm needs of industrial production & processing, logistics, parking and related applications.

Highbuild solventfree coating systems for MD floors are coloured resin coatings with very high solids (~100%), providing maximum coverage and durability. They are typically applied in at least three coats (including primer), forming a cohesive protective film with a total thickness above 300 mm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional scratch/levelling coat is applied prior to finishing.

These systems deliver a highquality appearance, with a smooth or antislip finish. The absence of solvents ensures low odour during application and full alignment with modern environmental requirements. They are ideal for car parks, industrial facilities and, broadly, for floors requiring increased mechanical and chemical resistance.

NEOTEX supplies advanced solvent-free epoxy coating systems that stand out for low odour in interiors and longterm resistance to abrasion, aggressive chemicals and heavy use

Selflevelling systems for MD floors are an ideal solution where high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under heavy loads are required. They typically consist of at least two layers (including primer), forming a cohesive film with a total thickness of 1 mm to approx. 2 mm, depending on application requirements.

Thanks to their flow characteristics, these systems ensure a uniform, level surface, and can deliver a smooth or antislip finish (by dense quartzsand broadcast between coats). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX offers advanced selflevelling epoxy systems and toughelastic polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are marked by stable thickness, load resistance and excellent surface uniformity—a reliable, comprehensive solution for MD floors where absolute functionality and upgraded aesthetics are required.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous movement of cars and trucks, as well as forklifts with rubber tyres, plus occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems providing exceptionally high protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical resistance.

NEOTEX offers advanced, durable selflevelling systems and multilayer systems with LEEDcompliant lowVOC performance, ideally tailored to MD/HD floors and fully meeting the high demands of industrial production & processing, logistics, parking and similar applications

Selflevelling systems for MD/HD floors are ideal where extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under very heavy loading are required. They usually consist of at least two layers (including primer) and create a cohesive film with a total thickness of 2 mm to approx. 4 mm (or more), depending on the application. Their flow enables uniform, level surfaces, and they can deliver a smooth or antislip finish (via dense quartzsand broadcast between coats). They provide very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and other surfaces with superior technical requirements.

NEOTEX provides advanced selflevelling epoxy systems and selflevelling polyurethane systems, designed to deliver excellent adhesion, high technical performance and longterm durability, without solvents. These systems are noted for thickness stability, load resistance and excellent surface uniformity—a reliable, comprehensive solution for MD/HD floors where absolute functionality and enhanced aesthetics are required.

LD – Light Duty (per FeRFA) floors include surfaces primarily subject to light pedestrian traffic and occasional passage of vehicles with rubber tyres. Such areas require systems that provide reliable protection against light mechanical impacts, along with ease of cleaning/maintenance, waterproofing and a meaningful aesthetic upgrade of the space.

NEOTEX offers advanced, highly durable waterbased varnish systems with LEEDcompliant VOC performance— an ideal solution for meeting LD requirements in residential, commercial or professional areas.

Waterbased varnish systems for LD floors consist of clear protective coatings, applied in two or more coats, with a low total dry film thickness (up to approx. 150 mm). They can deliver a smooth or anti slip finish—by adding a suitable anti slip additive in the final coat—and ensure a clean, durable and elegant surface suitable for everyday use.

NEOTEX provides water-based polyurethane varnish systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces subject to light to regular pedestrian traffic and occasional to frequent passage of vehicles with rubber tyres, as well as occasional forklift traffic with rubber wheels. These areas require systems that deliver high protection against mechanical loads, strong substrate adhesion, and increased resistance to chemical exposure.

NEOTEX offers advanced, durable waterbased coating systems with LEEDcompliant lowVOC performance—an ideal choice for meeting LD/MD requirements in residential, commercial or professional spaces.

Water based coating systems for LD/MD floors consist of coloured, water based coatings of high adhesion, applied in at least three coats (including the primer) to create a cohesive, protective film with a total thickness of 150 mm to 300 mm. They provide excellent aesthetics, with a smooth or anti slip finish (via anti slip additive in the topcoat or intermediate broadcast of quartz sand), ensuring outstanding functionality in everyday use environments.

NEOTEX supplies water-based epoxy coating systems distinguished by their longterm resistance to abrasion, scratching, staining and daytoday wear.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous passage of cars, trucks and forklifts with rubber tyres, as well as occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems that provide exceptionally high and effective protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical durability.

NEOTEX offers advanced and durable selflevelling systems and multilayer systems, ideally adapted to MD/HD requirements, fully covering the highdemand needs of industrial production & processing facilities, logistics areas, parking areas, etc., over the long term.

Selflevelling systems for MD/HD floors are an ideal solution for surfaces requiring extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under very heavy loading. They typically consist of at least two layers, including the primer, and create a cohesive film with a total thickness from 2 mm up to approx. 4 mm, depending on the application requirements.

Thanks to their flow, selflevelling systems ensure a uniform, level surface, while they can provide a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They deliver very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with superior technical requirements.

NEOTEX supplies advanced selflevelling epoxy systems and selflevelling polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are distinguished by thickness stability, resistance to heavy loads and excellent surface uniformity—constituting a reliable, comprehensive solution for Medium/Heavy Duty floors where absolute functionality and enhanced aesthetics are required.

Medium Duty (MD) floors (per FeRFA) include surfaces subjected to regular pedestrian traffic and frequent movement of cars, trucks and forklifts with rubber tyres, as well as occasional traffic of trolleys with hard plastic wheels. These areas require systems that offer very high and effective protection against mechanical loads, strong substrate adhesion, and durability under chemical exposure.

NEOTEX offers advanced and durable solventfree coating systems, as well as selflevelling systems, ideally suited to the requirements of MD floors, fully covering the longterm needs of industrial production & processing facilities, logistics areas, parking areas, etc..

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

Η ΝΕΟΤΕΧ διαθέτει προηγμένα αυτοεπιπεδούμενα εποξειδικά συστήματα και σκληρά-ελαστικά πολυουρεθανικά συστήματα, σχεδιασμένα για να προσφέρουν εξαιρετική πρόσφυση, υψηλή τεχνική απόδοση και μακροχρόνια ανθεκτικότητα, χωρίς την παρουσία διαλυτών. Τα συστήματα αυτά διακρίνονται για τη σταθερότητα του πάχους, την αντοχή σε καταπονήσεις και την εξαιρετική επιφανειακή ομοιομορφία τους - αποτελώντας μία αξιόπιστη, ολοκληρωμένη λύση για δάπεδα μεσαίας καταπόνησης όπου απαιτείται απόλυτη λειτουργικότητα, αλλά και αναβαθμισμένη αισθητική.

Η ΝΕΟΤΕΧ διαθέτει προηγμένα αυτοεπιπεδούμενα εποξειδικά συστήματα και σκληρά-ελαστικά πολυουρεθανικά συστήματα, σχεδιασμένα για να προσφέρουν εξαιρετική πρόσφυση, υψηλή τεχνική απόδοση και μακροχρόνια ανθεκτικότητα, χωρίς την παρουσία διαλυτών. Τα συστήματα αυτά διακρίνονται για τη σταθερότητα του πάχους, την αντοχή σε καταπονήσεις και την εξαιρετική επιφανειακή ομοιομορφία τους - αποτελώντας μία αξιόπιστη, ολοκληρωμένη λύση για δάπεδα μεσαίας καταπόνησης όπου απαιτείται απόλυτη λειτουργικότητα, αλλά και αναβαθμισμένη αισθητική.

Light Duty (LD – Light Duty per FeRFA) floors include surfaces subjected mainly to light pedestrian traffic and occasional passage of vehicles with rubber tyres. These areas require a system that provides reliable protection against mild mechanical loads, along with ease of maintenance/cleaning, waterproofing, and a meaningful aesthetic upgrade of the space.

NEOTEX offers advanced, highly durable waterbased coating systems, ideal for meeting the requirements of exterior LD floors in residential, commercial, professional or communal areas.

Waterbased varnish systems for LD floors consist of clear protective coatings, applied in two or more coats, with a low total dry film thickness (up to approx. 150 mm). They can deliver a smooth or anti slip finish—by adding a suitable anti slip additive in the final coat—and ensure a clean, durable and elegant surface suitable for everyday use.

NEOTEX provides water-based polyurethane varnish systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

Ideal for hotels, outdoor commercial areas, courtyards, walkways or even terraces, exterior decorative floors combine clean aesthetics, slip resistance, and resistance to sun–rain–thermal variations, providing a longlasting premium finish.
NEOTEX offers complete exterior decorative systems Stone Carpets and Sand Carpets, delivering impressive aesthetics and outstanding resistance to sunlight and weathering.

Designed for hotels, retail spaces, lobbies, offices and residences, interior decorative flooring systems offer a monolithic surface, high durability, and complete aesthetic customisation.
NEOTEX provides a full range of interior decorative flooring systems — from Stone Carpets and metalliceffect systems, to threedimensional (3D) surfaces and floors with coloured flakes/chips.
Despite their different aesthetic orientations, the common denominator is an impressive, highquality final result that upgrades each space in a unique way.

Medium Duty (MD) floors (per FeRFA) include surfaces subjected to regular pedestrian traffic and frequent movement of cars, trucks and forklifts with rubber tyres, as well as occasional traffic of trolleys with hard plastic wheels. These areas require systems that offer very high and effective protection against mechanical loads, strong substrate adhesion, and durability under chemical exposure.

NEOTEX offers advanced and durable solventfree coating systems, as well as selflevelling systems, ideally suited to the requirements of MD floors, fully covering the longterm needs of industrial production & processing facilities, logistics areas, parking areas, etc..

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

MD/HD – Medium/Heavy Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent to continuous passage of cars, trucks and forklifts with rubber tyres, as well as occasional to frequent traffic of trolleys with hard plastic wheels. Impact risk is also elevated. These areas require systems that provide exceptionally high and effective protection against mechanical loads, superior resistance to abrasion/scratching and impact, strong substrate adhesion, and sustained chemical durability.

NEOTEX offers advanced and durable selflevelling systems and multilayer systems, ideally adapted to MD/HD requirements, fully covering the highdemand needs of industrial production & processing facilities, logistics areas, parking areas, etc., over the long term.

Selflevelling systems for MD/HD floors are an ideal solution for surfaces requiring extremely high mechanical strength, excellent flatness, seamless aesthetics and reliable performance under very heavy loading. They typically consist of at least two layers, including the primer, and create a cohesive film with a total thickness from 2 mm up to approx. 4 mm, depending on the application requirements.

Thanks to their flow, selflevelling systems ensure a uniform, level surface, while they can provide a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They deliver very high resistance to abrasion and impact, mechanical loads and common industrial chemicals, making them suitable for industrial floors, car parks, hightraffic corridors and, in general, surfaces with superior technical requirements.

NEOTEX supplies advanced selflevelling epoxy systems and selflevelling polyurethane systems, engineered to provide excellent adhesion, high technical performance and longterm durability, without solvents. These systems are distinguished by thickness stability, resistance to heavy loads and excellent surface uniformity—constituting a reliable, comprehensive solution for Medium/Heavy Duty floors where absolute functionality and enhanced aesthetics are required.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

Basement and groundlevel parking areas require floors with high mechanical strength, stability under point loads, and resistance to tyre abrasion, as well as chemical resistance to oils, fuels and salts. Controlled slip resistance is also critical for safe movement in turning zones and braking areas.

In basement parking areas, due to limited natural ventilation, systems are often required to be resistant to rising moisture and to feature low odours / low VOC emissions during application. Final systems must ensure easy washability and high visual clarity for signage and markings.

NEOTEX provides solventbased and waterbased coating systems, solventfree coating systems and selflevelling systems for basement & groundfloor parking areas, with options for smooth or antislip textures, high resistance to contaminants, and longterm performance — ensuring uninterrupted operation, cleanliness and low maintenance cost.

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Waterbased coating systems for LD/MD (Light/Medium Duty) floors consist of coloured, waterbased coatings of high adhesion, applied in at least three coats (including the primer) to form a cohesive, protective film with a total thickness of 150 mm to 300 mm. They deliver excellent aesthetics, with a smooth or antislip finish (by adding a suitable antislip additive to the topcoat or by an intermediate broadcast of quartz sand), ensuring outstanding functionality in daytoday environments.

NEOTEX offers water-based epoxy coating systems that stand out for their longterm resistance to abrasion, scratching, staining and everyday wear.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

Outdoor parking areas located on roofs and terraces require specialized highstrength systems, as these surfaces are subjected to much higher mechanical and environmental stresses compared to typical flat roofs. These systems must combine durable waterproofing with reliable protection against abrasion, offering excellent elasticity, controlled slip resistance, and resistance to thermal variations, while maintaining their integrity despite the substrate’s expansioncontraction movements and micromovements.

In addition, they must withstand intense abrasion, point loads, vehicular traffic, and chemical exposure such as oils, fuels and salts. Selecting durable, certified waterproofing systems with high resistance to wheeledtraffic loads is a critical factor for the longterm protection of the structure.

In intermediatelevel parking areas, the floor is subjected to continuous traffic, dynamic loads, as well as structural vibrations and thermal movements of the supporting structure. For this reason, toughelastic systems with high crackbridging capability are preferred, as they can follow micromovements without cracking.

At the same time, the surfaces must provide increased resistance to abrasion and point stresses, durability against oils and fuels, as well as ease of cleaning/maintenance, so that they can withstand demanding daily use.

NEOTEX offers hardelastic solventbased coating systems and selflevelling systems with selected application thicknesses and resin technologies, forming monolithic, durable surfaces with excellent crackbridging capability, high resistance to tire/fuel staining, and reliable functional stability.

Solventbased coating systems consist of coloured coatings of high adhesion, applied in at least three layers (including the primer), forming a highly durable and cohesive protective film. They provide excellent aesthetics, with smooth or antislip finishes—depending on the addition of an antislip additive or an intermediate quartzsand broadcast—and ensure excellent functionality under frequent and intense loads.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces subject to light to regular pedestrian traffic and occasional to frequent passage of vehicles with rubber tyres, as well as occasional forklift traffic with rubber wheels. These areas require systems that deliver high protection against mechanical loads, strong substrate adhesion, and increased resistance to chemical exposure.

NEOTEX offers advanced, durable waterbased coating systems with LEEDcompliant lowVOC performance—an ideal choice for meeting LD/MD requirements in residential, commercial or professional spaces.

Solventbased coating systems for LD/MD floors comprise coloured coatings of high adhesion, applied in at least three coats (including primer) to form a tough, cohesive protective film 150 mm–300 mm thick. They deliver excellent aesthetics with smooth or antislip finishes (via antislip additive or intermediate quartzsand broadcast), ensuring strong functionality under frequent, intense service.

NEOTEX offers epoxy, polyurethane, and fastcuring polyaspartic solventbased systems that stand out for longterm resistance to abrasion/scratching, common chemicals, and dynamicload stresses.

MD – Medium Duty (per FeRFA) floors include surfaces with regular pedestrian traffic and frequent movement of cars and trucks, as well as forklift traffic with rubber tyres, plus occasional traffic of trolleys with hard plastic wheels. Such spaces demand systems that deliver very high and effective protection against mechanical loads, strong substrate adhesion, and resistance to chemical exposure.

NEOTEX provides advanced, durable solventfree coating systems and selflevelling systems with LEEDcompliant lowVOC performance, ideally tailored to MD floors and fully meeting the longterm needs of industrial production & processing, logistics, parking and related applications.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

Micro-cement is one of the most popular choices for commercial spaces and residences, thanks to its monolithic appearance, minimal aesthetic, and functional versatility.
However, its surface is sensitive to stains, abrasion, moisture and chemical cleaners, which makes the application of suitable protective systems essential to ensure longterm durability and preservation of the finish.

NEOTEX offers advanced solventbased and waterbased polyurethane varnish systems, specially designed for the protection of micro-cement coatings in areas such as residences, shops, offices, hotels and hospitality environments.
These systems provide abrasion resistance, protection from stains and moisture, easy cleaning, and options for mat, satin or glossy finish.
With high adhesion and resistance to everyday use, they ensure that the micro-cement coating retains its natural beauty and functionality for many years.

Ideal for hotels, outdoor commercial areas, courtyards, walkways or even terraces, exterior decorative floors combine clean aesthetics, slip resistance, and resistance to sun–rain–thermal variations, providing a longlasting premium finish.
NEOTEX offers complete exterior decorative systems Stone Carpets and Sand Carpets, delivering impressive aesthetics and outstanding resistance to sunlight and weathering.

Designed for hotels, retail spaces, lobbies, offices and residences, interior decorative flooring systems offer a monolithic surface, high durability, and complete aesthetic customisation.
NEOTEX provides a full range of interior decorative flooring systems — from Stone Carpets and metalliceffect systems, to threedimensional (3D) surfaces and floors with coloured flakes/chips.
Despite their different aesthetic orientations, the common denominator is an impressive, highquality final result that upgrades each space in a unique way.

Medium Duty (MD) floors (per FeRFA) include surfaces subjected to regular pedestrian traffic and frequent movement of cars, trucks and forklifts with rubber tyres, as well as occasional traffic of trolleys with hard plastic wheels. These areas require systems that offer very high and effective protection against mechanical loads, strong substrate adhesion, and durability under chemical exposure.

NEOTEX offers advanced and durable solventfree coating systems, as well as selflevelling systems, ideally suited to the requirements of MD floors, fully covering the longterm needs of industrial production & processing facilities, logistics areas, parking areas, etc..

The highbuild solventfree coating systems designed for Medium Duty (MD) floors consist of coloured resin coatings with very high solids content (~100%), offering maximum coverage and durability. They are typically applied in at least three coats (including primer), creating a cohesive protective film with a total thickness above 300 μm and up to approx. 2 mm, depending on whether quartz sand is incorporated between coats or an additional levelling/smoothing layer is applied prior to coating.

These systems deliver a highquality aesthetic result, with the option of a smooth or antislip finish, while the absence of solvents ensures low odour during application and full compliance with modern environmental requirements. They are an ideal choice for parking areas, industrial facilities, and in general for floors requiring increased mechanical and chemical resistance.

NEOTEX offers advanced solventfree epoxy systems and fastcuring polyaspartic systems that stand out for their low odour during application in interior spaces, as well as their longterm resistance to abrasion, aggressive chemicals and heavy use.

Selflevelling systems for Medium Duty (MD) floors are an ideal solution for surfaces requiring high mechanical strength, excellent flatness, seamless aesthetics and reliable behaviour under particularly heavy loads. They typically consist of at least two layers, including the primer, forming a cohesive film with a total thickness from 1 mm up to approx. 2 mm, depending on application requirements.

Thanks to their fluidity, selflevelling systems ensure a uniform, level surface, while they can be configured with a smooth or antislip finish (by applying a dense quartzsand broadcast between layers). They provide very high resistance to abrasion and impact, mechanical loads and common chemicals, making them suitable for industrial floors, parking areas, hightraffic corridors and, in general, surfaces with elevated technical requirements.

NEOTEX provides advanced selflevelling epoxy systems, toughelastic polyurethane systems, as well as fastcuring polyaspartic systems, designed to deliver excellent adhesion, high technical performance and longterm durability, all solventfree. These systems are distinguished by thickness stability, load resistance and excellent surface uniformity—constituting a reliable, complete solution for Medium Duty floors where absolute functionality and enhanced aesthetics are required.

LD/MD – Light/Medium Duty (per FeRFA) floors include surfaces with light to regular pedestrian traffic and occasional to frequent passage of rubbertyred vehicles, as well as occasional forklift traffic (rubber wheels). Such areas require systems offering high resistance to abrasion/scratching, robust adhesion to the substrate, resilience to dynamic loads, and increased chemical resistance.

NEOTEX supplies a complete range of solventbased coating systems and waterbased coating systems tailored to the specific LD/MD requirements of industrial, commercial and logistics areas. With high mechanical strength, operational stability, and reliable behaviour under chemical exposure, these systems constitute an effective solution for demanding facilities.

The waterborne polyurethane varnish systems Neodur® Varnish W are highperformance solutions for the protection and aesthetic enhancement of polished cement screed and many other substrates, covering every requirement regarding gloss level (Gloss, Satine and Mat) and the final visual finish — also available in smooth or antislip versions.
They are characterised by low or nearzero odour, userfriendliness, and excellent compatibility with interior spaces.

Neodur® Varnish W systems provide strong protection against water absorption, enhance the mechanical strength of the surface, and ensure longterm stability against sunlight and yellowing.
Additionally, they offer high hardness, abrasion resistance, and excellent resistance to dirt and common stains, creating a uniform, attractive and durable final film.

Neodur® Varnish W Satine additionally features LEEDcompliant VOC performance, is classified in the top A+ class for indoor VOC emissions, and is suitable for foodarea applications, making it the ideal choice for projects requiring strict environmental and hygiene compliance.

With a combination of technical performance, durability and premium aesthetics, Neodur® Varnish W systems offer comprehensive solutions for longterm protection and enhancement of the surface — especially in environments where low application odour, visual cleanliness, and easy maintenance are top priorities.

The solventbased polyurethane varnish systems Neodur® Varnish are specifically designed to offer highquality protection and durability for micro-cement coatings and a wide range of other substrates, meeting every requirement regarding gloss level (Gloss, Satine and Mat) and the final aesthetic appearance of the surface — with an additional option for a smooth or antislip finish.
Thanks to their chemical formulation, they significantly enhance the mechanical strengths of the substrate, protecting it over time from water absorption, wear and daily stresses.

With the integration of UV filters, Neodur® Varnish ensures longterm stability against photoageing, preventing yellowing and visual surface alterations.
They also offer excellent adhesion to various substrates and create a highhardness final surface, capable of withstanding abrasion, scratching, and exposure to diluted acids and alkalis.

The Neodur® Varnish product range also presents excellent resistance to dirt and common stains, making it ideal where a clean and easytomaintain surface is required.
The uniform, highaesthetic final result enhances the texture and character of the surface, offering longterm protection and stability.

Η ΝΕΟΤΕΧ διαθέτει προηγμένα αυτοεπιπεδούμενα εποξειδικά συστήματα και σκληρά-ελαστικά πολυουρεθανικά συστήματα, σχεδιασμένα για να προσφέρουν εξαιρετική πρόσφυση, υψηλή τεχνική απόδοση και μακροχρόνια ανθεκτικότητα, χωρίς την παρουσία διαλυτών. Τα συστήματα αυτά διακρίνονται για τη σταθερότητα του πάχους, την αντοχή σε καταπονήσεις και την εξαιρετική επιφανειακή ομοιομορφία τους - αποτελώντας μία αξιόπιστη, ολοκληρωμένη λύση για δάπεδα μεσαίας καταπόνησης όπου απαιτείται απόλυτη λειτουργικότητα, αλλά και αναβαθμισμένη αισθητική.